Philips Refrigerator 42PF5320 79 User Manual

cover 2444.1 09-12-2005 11:25 Pagina 1  
 
2444.1 en 09-12-2005 11:50 Pagina 1  
Introduction  
Help?  
Thank you for purchasing this television set.  
If this instruction manual does  
not give an answer or if ‘Tips’ do  
not solve your TV problem, you  
can call your Local Philips  
Customer or Service Centre. See  
the supplied World-wide  
This handbook has been designed to help you install and  
operate your TV set. We would strongly recommend that you  
read it thoroughly.  
We hope our technology meets entirely with your satisfaction.  
guarantee booklet.  
Table of Contents  
Please, have the Model and  
Product number which you can  
find at the back of your  
television set or on the  
packaging, ready, before calling  
the Philips helpline.  
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
To use the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Remote control  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5  
The keys on the right side of the TV set . . . . . . . . . . . . . .6  
Camcorder, video games, headphone . . . . . . . . . . . . . . . . . .6  
Rear connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Recorder (VCR-DVD+RW) . . . . . . . . . . . . . . . . . . . . . .7  
Devices with ComponentVideo Output connectors . . .8  
Devices with Progressive Scan output . . . . . . . . . . . . . 9  
Devices with HDMI connector . . . . . . . . . . . . . . . . . .10  
Devices with DVI connector to the HDMI connector  
of the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Computer withVGA connector to the PC-VGA  
Model: 42PF5320/79  
Product No:  
connector of the TV . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Side connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Record with your recorder . . . . . . . . . . . . . . . . . . . . . . . .13  
How to search for and store TV channels . . . . . . . . . . . . .14  
Give name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Editing of channels . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Features menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
PIP (Picture in Picture) . . . . . . . . . . . . . . . . . . . . . . . .17  
Child lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Using in PC monitor mode . . . . . . . . . . . . . . . . . . . . . . . .20  
Using in HD (High Definition) mode . . . . . . . . . . . . . . . . .21  
Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22  
Recycling  
The materials used in your set are either reusable or can be recycled.  
To minimise environmental waste, specialist companies collect used  
appliances and dismantle them after retrieving any materials that can be used  
again (ask your dealer for further details).  
°
1
 
2444.1 en 09-12-2005 11:50 Pagina 2  
Care of the screen  
Do not touch, push or rub or strike the screen with anything hard as this may scratch, mar or damage the  
screen permanently. Do not rub with dust clothes with chemical treatment. Do not touch the surface with bare  
hands or greasy cloth (some cosmetics are detrimental to the screen). Unplug the TV before cleaning the  
screen.When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like  
chamois soaks. Do not use acetone, toluene and alcohol because they cause chemical damage.  
Do not use liquid cleaners or aerosol cleaners.Wipe off saliva or water drops as soon as possible.Their long  
time contact with the screen causes deformations and colour fading.  
Warning concerning stationary images on theTV screen  
A characteristic of Plasma Display Panels is that displaying the same image for a long time can cause a  
permanent after-image to remain on the screen.This is called phosphor burn in.  
Normal use of the TV should involve the showing of pictures that contain constantly moving and changing  
images that fill the screen.  
Black Bars  
When black bars appear at the left and right side of the screen, it is recommended to change to a picture  
format so that the picture fills the entire screen.  
Preparation  
& Wall mounting instructions/Table stand  
How to mount the supplied wall mount  
bracket, see the supplied Quick Start Guide.  
Make sure that the wall mount is being fixed  
securely enough so that it meets safety  
standards.The weight of the TV (excl.  
packaging) is about 42 kg.  
To connect peripheral equipment, see p. 6.  
( Insert the mains cord supplied into the mains  
at the bottom of the TV and in the wall socket  
having a mains voltage of 198-264V.  
To prevent damaging the power (AC) cord  
which could cause a fire or electric shock, do  
not place the TV on the cord.  
Note: Other (not supplied) stands are optional  
accessories. Consult your dealer.  
§ Remote control: Pull out the plastic insulation  
sheet from the battery, this will activate the  
remote control.  
é For ventilation, leave at least 5 cm free all  
around the TV.  
The battery supplied with  
the appliance does not  
contain mercury or nickel  
CR 2025  
cadmium so as to protect  
the environment. Please  
do not discard your used  
batteries, but use the  
recycling methods  
available (consult your  
distributor).  
To prevent any unsafe situations, no naked  
flame sources, such as lighted candles, should  
be placed in the vicinity.Avoid heat, direct  
sunlight and exposure to rain or water.  
The equipment shall not be exposed to  
dripping or splashing.  
è Switch theTV on : Press the power switch B  
at the right side of the TV.  
An indicator on the front of the TV lights up.  
Press the -P+ keys or the B key on the  
remote control.  
Insert the aerial plug firmly into the aerial  
socket x at the bottom of the TV. For best  
picture quality use the suppressor-aerial cable  
supplied.  
2
 
2444.1 en 09-12-2005 11:50 Pagina 3  
To use the menus  
& Press the MENU key on the remote control to  
( Use the cursor left/right to adjust.  
summon the main menu.  
§ To exit the menus, press the MENU key  
é Use the cursor up/down to select Picture,  
repeatedly.  
Sound, Features or Install.  
Use the cursor in the right direction to select  
Note: Items temporary not available or not relevant are  
displayed in a light grey colour and cannot be selected.  
the menu item.  
Use the cursor up/down again to select a  
setting.  
Picture menu:  
TV menu  
Brightness: this changes picture brilliance.  
Colour: this changes the intensity of the  
colour.  
Contrast: this changes the difference  
between the light and dark tones.  
Sharpness: this changes the picture  
definition.  
Hue: this adjusts the picture to obtain  
natural skintones.  
ColourTemp.: this changes the colour  
TV Menu  
Picture  
p
π
Picture π  
Sound  
Brightness π  
Colour  
Features  
Install  
Contrast  
Sharpness  
Hue  
Colour Temp.  
Cool  
(bluer);  
(redder).  
Normal  
(balanced)  
rendering:  
Warm  
or  
Sound menu:  
Equalizer: to adjust the sound tone (from  
bass 120 Hz to treble 10 kHz).  
TV Menu  
Sound  
Balance: this balances the sound on the left  
and right speakers.  
• (AVL (AutomaticVolume Leveller): this is  
used to limit increases in sound, especially on  
programme change or advertising slots.)  
Picture  
Sound π  
Features  
Install  
Equalizerπ  
Balance  
(AVL)  
DolbyVirtual  
120 Hz  
500 Hz  
1500 Hz  
5 kHz  
DolbyVirtual  
: simulates the surround sound  
10 kHz  
experience from two speakers using Dolby  
Pro Logic* providing the listener with the  
sensation of being surrounded by additional  
speakers.  
* Manufactured under license from Dolby Laboratories.  
DolbyPro Logic’ and the double-D symbol are trademarks of  
Dolby Laboratories.  
TV Menu  
Features  
Features menu:  
Timer π (Sleep)  
Timer, Child lock and PIP: see p. 17-18.  
Contrast+: automatic adjustment of the  
picture contrast which permanently sets the  
darkest part of the picture to black.  
NR: attenuates picture noise (snow) in  
difficult reception conditions.  
Picture  
Sound  
Features π  
Install  
Child Lock Time  
Contrast+ Start Time  
NR Stop Time  
PIP Channel  
Activate  
Display  
see p. 14  
Install menu:  
3
 
2444.1 en 09-12-2005 11:50 Pagina 4  
Use of the remote control  
B Standby  
Press to switch the TV on or off  
from or to standby mode.  
When switched off, a red indicator  
on the TV lights up.  
x no function  
æPIP (Picture in Picture) on/off  
(p. 12)  
®Ò‡π†  
Video recorder or DVD keys  
ı List of programmes  
To display/clear the list of  
programmes. Use the keys to  
select a programme and the key π  
to display it.  
Q Surround mode  
Virtual Dolby* Surround  
Optimal with Dolby surround signals.  
Enables you to experience the effect  
of Dolby surround Pro Logic,  
reproducing a rear sound effect. See  
Sound menu, DolbyVirtual, p. 3.  
Note:You can make the same selection in  
the Sound menu, p. 3.  
X Sound mode  
To switch from Stereo or Nicam  
Stereo to Mono or to choose  
between Dual I or Dual II in case of  
bilingual transmission.  
When the sound mode is Mono, the  
indication is displayed in red.  
AV To display the Source list to  
select TV or peripheral equipment  
connected to CVI-1, AV, PC-  
VGA/CVI-2, HDMI/PC-D or Side.  
See also p. 6.  
f:gb Teletext  
Teletext keys. See p. 13.  
OK Only applicable for DVD or  
h Active control  
AUX mode. See p. 13.  
Optimizes the picture quality  
according to the quality of the  
reception.  
¬
Interrupt the sound or restore it.  
Press this key to switch between  
On, On with sensor and Off.  
Smart picture a and sound M  
To select predefined picture and  
sound settings.  
MENU Main menu on/off  
This Philips TV has been set at the  
factory to look best in bright store  
environments which use fluorescent  
lighting.As your home will likely not be  
as well lit as a store, we recommend  
you that you cycle through the various  
smart picture modes to find the one  
that best suits your own viewing  
conditions. Most consumers will find  
that Natural is the correct choice.  
Cursor keys  
Press the keys oœpπ to  
navigate through the menus.  
VOL To adjust the volume.  
0/9 Digit keys  
To select a TV channel.  
For a two digit programme number,  
enter the second digit before the  
dash disappears.  
P
Programme selection  
To move up or down a programme.  
The number, (the name) and the  
sound modes are displayed for a few  
seconds.  
For some TV programmes the title of the  
programme appears at the bottom of the  
screen.  
0
PreviousTV channel  
Press to display the previously  
selected TV channel.  
4
 
2444.1 en 09-12-2005 11:50 Pagina 5  
MODE* Press this key to switch between TV, DVD and AUX functions.  
q 16:9 formats  
The pictures you receive may be transmitted in 16:9 format (wide screen)  
or 4:3 format (conventional screen).  
4:3 picture sometimes have a black band at the top and the bottom of  
the screen (letterbox format).  
This function allows you to optimise the picture display on screen.  
Using the different formats  
Press the q key or use the keys to select the different modes:  
4:3, Movie Expand 14:9, Movie Expand 16:9, Subtitle Zoom, Superzoom  
and Widescreen.  
4:3  
The picture is reproduced in 4:3 format and a black band is  
displayed on either side of the picture.  
Movie Expand 14:9  
The picture is enlarged to 14:9 format, a thin black band  
remains on both sides of the picture.  
Movie Expand 16:9  
The picture is enlarged to 16:9 format.This mode is  
recommended when displaying pictures which have black  
bands at the top and bottom (letterbox format).  
Subtitle Zoom  
This mode is used to display 4:3 pictures using the full  
surface of the screen leaving the subtitles visible.  
Superzoom  
This mode is used to display 4:3 pictures using the full  
surface of the screen by enlarging the sides of the picture.  
Widescreen  
This mode restores the correct proportions of pictures  
transmitted in 16:9 using the full screen display.  
Note: If you display a 4:3 picture in this mode, it will be enlarged  
horizontally.  
i Screen information  
To display/remove the programme number, the name (if it exists), the  
time, the sound mode and the time remaining on the timer.  
Hold down for 5 seconds to permanently display the programme number  
on the screen.  
* Mode selector  
The remote control lets you control the main functions of theVCR or DVD.  
Press the MODE key to select the required mode: DVD or AUX (VCR).  
The remote control indicator lights up to display the selected mode. It switches off automatically  
after 20 seconds if left idle.The remote control automatically returns to TV mode.  
The following keys are operational, depending on the equipment (see p. 13):  
B, X, ®Ò‡π†, OK, MENU, cursor keys, -P+, digit keys, i, 0.  
5
 
2444.1 en 09-12-2005 11:50 Pagina 6  
Keys on the right side of the TV  
Should your remote be lost or broken you can still  
change some of the basic settings with the keys on  
the right side of your TV.  
Press:  
POWER : to switch the TV on or off.  
+ VOLUME - : to adjust sound level.  
+ PROGRAM - : to select programmes.  
MENU : to access or close menus.  
The + PROGRAM - keys can be used to select an  
adjustment and the +VOLUME - keys to make  
that adjustment.  
-
VOLUME  
+
MENU/OK  
-
PROGRAM  
+
POWER  
Rear connections  
There is a wide range of audio and video devices that can be connected to your TV.The following  
connection diagrams show you how to connect them to the TV.  
CVI-1 can handleYPbPr and Audio L/R; AV CVBS,Y/C and Audio L/R; PC-VGA/CVI-2 VGA orYPbBr and Audio L/R;  
HDMI/PC-D HDMI or DVI.  
MONITOR OUT  
CVI-1  
PC-VGAA/CVI-2  
/PC-D  
6
 
2444.1 en 09-12-2005 11:50 Pagina 7  
Recorder (VCR-DVD+RW)  
CABLE  
4
3
IN  
OUT  
RECORDER  
Note: Do not place your recorder too close to the screen as some recorders may be susceptible for signals from the  
display. Keep a minimum distance of 0,5m from the screen.  
& Connect the RF Antenna cable 1 to the RF IN socket of your recorder.  
é Connect another RF cable 2 from the output OUT of your recorder to the TV’s input x  
ANTENNA 75 jack.  
Better playback quality can be obtained if you also connect theVideo,Audio Left and Right (only for  
stereo equipment) AV cables 3 to the VIDEO, AUDIO L and R input jacks of AV.  
Press the AV key on the remote control repeatedly until AV is selected.  
If your recorder has an S-VHS video jack:  
For improved picture quality, connect an S-video cable 4 with the S-VIDEO input.  
S-Video does not provide audio, so audio cables must still be connected to provide sound.  
MONITOR OUT  
L/Mo
6
The MONITOR OUT connector can be used for daisy  
chaining or to record programs from your TV 6. Only  
when a recorder is connected to MONITOR OUT it is  
possible to record an analog program from your TV. See  
Record with your recorder, p. 13.  
IN  
OUT  
RECORDER  
7
 
2444.1 en 09-12-2005 11:50 Pagina 8  
Devices with Component Video Output Connectors (YPbPr)  
CVI-1 can handle 480i, 480p, 576i, 576p, 720p and 1080i signals.  
CVI-1  
CVI-1  
CABLE  
4
2
3
OUT  
1
IN  
& Connect the RF Antenna cable 1 to the RF IN socket of your recorder.  
é Connect another RF cable 2 from the output OUT of your recorder to the TV’s input ANTENNA  
x 75 jack.  
Connect the three separate component video cables 3 to the device having component video  
outputs (YPbPr), such as DVD-players, laser-disc players, videogame players, satellite receivers, or other  
equipment and to the Y, Pb and Pr jacks of CVI-1 on the TV.  
Connect the audio cable 4 to the device’s AUDIO L and R jacks and to the L and R audio jacks of  
CVI-1.  
Note: the labels for the component video sockets may differ depending on the DVD player or the device  
connected.Although the abbreviations may vary the letters B and R stand for blue and red component signals,  
respectively, andY indicates the luminance signal. Refer to the DVD player’s or device’s instructions for use for  
definitions and connection details.  
( Press the AV key on the remote control repeatedly until CVI-1 is selected.  
8
 
2444.1 en 09-12-2005 11:50 Pagina 9  
Devices with Progressive scan output  
(e.g. a digital Set Top box, a video game console or Progressive scan DVD player (480p, 576p, 720p or  
1080i)  
PC-VGA/CVI-2  
PC-VGA/CVI-2  
2
1
DVD  
& Connect the device with 2Fh YPbPr output to the VGA connector 1 (with the supplied adapter  
cableVGA to cinch) and to the L and R AUDIO jacks 2 of PC-VGA/CVI-2.  
See also the manual of your High Definition device.  
é Press the AV key on the remote control repeatedly until PC-VGA/CVI-2 is selected.  
Note:This television is designed to accept high definition signal standards 480p, 576p, 720p and 1080i as  
specified by the Electronic Industries Association standard EIA770.3.  
Digital devices from different manufacturers have the possibility of differing output standards which may cause  
difficulties for the television to properly display.  
Warning: In case you notice scrolling images, wrong colors or no colour, no picture, or even combinations of these  
on your screen, check if the connections are done in the correct way or move your digital device further away  
from your TV.  
9
 
2444.1 en 09-12-2005 11:50 Pagina 10  
Devices with HDMI (High Definition Multimedia Interface) connector  
HDMI is the leading new standard for Digital High  
Definition video and audio interconnection. Eg. with a  
Digital Set top box, with HDMI-equipped devices like a  
DVD-R,AV receiver...  
HDMI/PC-D  
PC-VGA/CV
/PC-D  
The HDMI connector allows the following TV and  
monitor display modes via the AV key on the remote  
control, for High Definition (HD) and computer (PC)  
equipment:  
ENHANCED DEFINITION TV (EDTV)  
720 x 576p  
HIGH DEFINITION (HDTV)  
1280 x720p  
1920 x1080i  
VGA (PC) 640 x 480  
1
60 Hz  
60 Hz  
60 Hz  
60 Hz  
SVGA  
XGA  
800 x 600  
1024 x 768  
1280 x1024  
& Connect the digital HDMI output of your HD device  
(e.g. DVD player, Set Top Box..) to the HDMI/PC-D  
connector of your TV 1.  
Notes:  
- Proper working is only guaranteed with HDMI compliant  
consumer products.  
- Digital devices from different manufacturers have the  
possibility of differing output standards which may cause  
for the television to properly display;  
- If the set is cold, there may be a small “flicker” when the  
set is turned on.This is normal, there is nothing wrong with  
the set.  
é Press the AV key on the remote control repeatedly  
until HDMI/PC-D is selected.  
Press the X key on the remote control repeatedly to  
select HDMI Audio.  
Computer or device with DVI connector to the HDMI connector of the TV  
HDMI/PC-D  
& In case a HD-DVI device (connected with a DVI to  
HDMI cable) 1 is connected, also connect the audio  
cable 2 (if audio is present) to the AUDIO outputs  
of your HD device and the R (right) and L (left) CVI-2  
inputs of the panel of the TV.  
PC-VGA/CVI-2  
/PC-D  
é Press the AV key on the remote control repeatedly  
HDMI  
1
until HDMI/PC-D is selected.  
Press the X key on the remote control repeatedly to  
select PC-HD Audio.  
2
DVI  
10  
 
2444.1 en 09-12-2005 11:50 Pagina 11  
Computer with VGA connector to the PC-VGA connector of the TV  
PC-VGA/CVI-2  
PC-VGA/CVI-2  
2
1
& Connect one end of aVGA cable 1 to the video card of the computer and the other end to the  
VGA connector at the bottom of the TV.  
Fix the connectors firmly with the screws on the plug.  
é In case of a Multimedia computer, connect the audio cable 2 to the audio outputs of your  
Multimedia computer and to the AUDIO R (right) and L (left) inputs.  
Press the AV key on the remote control repeatedly until PC-VGA/CVI-2 is selected.  
The VGA connector allows the following TV and monitor display modes:  
VGA  
SVGA  
640 x 480  
800 x 600  
1024 x 768  
1024 x 768  
60 Hz  
60 Hz  
60 Hz  
60 Hz  
XGA  
1280 x 1024 60 Hz  
Note:  
If possible, use the XGA1024x768@60Hz video mode to obtain the best image quality.  
11  
 
2444.1 en 09-12-2005 11:50 Pagina 12  
Side connections (camcorder, video games, headphone,...)  
3
IN  
2
IN  
1
Camera, Game or Camcorder  
& Connect your camera, game or camcorder as shown.  
é Connect to VIDEO 2 and AUDIO L 3 for mono equipment. For stereo equipment also connect  
AUDIO R 3.  
S-VHS quality with an S-VHS camcorder is obtained by connecting the S-VHS cables with the S-  
VIDEO input 1 and AUDIO inputs 3.  
Do not connect cable 1 and 2 at the same time;This may cause picture distortion.  
Press the AV key on the remote control.  
Press the cursor up/down to select REAR/SVHS.  
( Press the cursor right.  
Headphone  
Insert the plug into the headphone socket L as shown.  
The headphone impedance must be between 8 and 4000 Ohm.The headphone socket has a 3.5 mm jack.  
12  
 
2444.1 en 09-12-2005 11:50 Pagina 13  
Record with your recorder  
Record aTV program  
You can record a TV program using your recorders tuner without affecting your TV.  
& Select the channel number on your recorder.  
é Set your recorder to record.  
See the handbook for your recorder.  
Switching channel numbers on your TV does not disturb recording !  
Record a programme from MONITOR OUT  
You can record a program on your recorder from the TV tuner, and from a device connected to AV or  
the side connectors.  
Note: you cannot record from a CVI or HDMI connected device.  
& Select the programme you want to record and the correct input on your recorder.  
é Set your recorder to record.  
Do not switch to another TV channel,AV programme or programme from a device connected to the side while  
recording. Switching to a programme from a device connected to CVI or HDMI does not disturb recording.  
13  
 
2444.1 en 09-12-2005 11:50 Pagina 14  
How to search for and store TV channels  
TV Menu  
To install your TV proceed as follows:  
Picture  
Sound  
Features  
Install π  
Language  
Auto Store  
Manual Store  
Sort  
& Press the MENU key on the remote control.  
é Use the cursor up/down to select Install.  
Press the cursor right to enter the Install menu.  
Use the cursor left/right to select your language.  
Name  
Channel Edit  
Auto store  
Auto Store  
& Select Auto Store in the Install menu.  
Channel π  
..........  
freq  
The autostore option label Start ? appears.  
TV π  
é Press the cursor right.  
o
The progress of autoprogramming is displayed.  
You can use the Sort menu to renumber the stored TV  
channels.  
p
π
œ
Note: Channel numbers will always be written in Latin characters,  
even when a language has been selected which uses other  
characters.  
Sorting TV channels  
Install  
& Select Sort in the Install menu and press the cursor right  
Language  
Auto Store  
Manual Store  
Sort π  
Name  
Channel Edit  
....  
10 p  
11  
12 π  
13  
é Select the TV channel you want to move using the cursor  
up/down and press cursor right.  
Select the new number and validate with the cursor left.  
Repeat steps é and for each TV channel you wish to  
renumber.  
( To exit the menus, press the MENU key repeatedly.  
14  
 
2444.1 en 09-12-2005 11:50 Pagina 15  
Manual store  
Searching for and storing TV channels is done channel by  
channel.You must go through every step of the Manual  
Installation menu.  
Install  
Language  
Auto Store  
Colour System  
Sound System  
& Select Manual Store in the Install menu and press the  
cursor right to enter.  
Manual Store π Search  
é Select Colour system and press the cursor right.  
Sort  
Name  
Channel  
Fine tune  
Store  
If Auto is selected, the respective colour system will be  
automatically selected according to the transmission system.  
If the reception is poor, select another colour system with the  
cursor left/right.  
Channel edit  
Press the cursor down.  
Select Sound system and press the cursor right. If Auto is  
selected, the respective sound system will be automatically  
selected according to the transmission system.  
Note: if the reception is poor, select another sound system with  
the cursor left/right.  
( Press the cursor down.  
§ Search for aTV channel:  
Press the cursor down to select Search and press the  
cursor right to start searching.  
Direct selection of aTV channel:  
If you know the frequency, enter it directly with the digit keys 0 to  
9.Ask for a list from your cable company or dealer, alternatively  
consult the Table of frequencies on the inside backcover of this  
handbook.  
è Press the cursor down and enter the programme number  
with the digit keys.  
! Fine tune:  
In case of poor reception, you can improve the reception by  
adjusting the frequency with the cursor left/right.  
ç To store your TV channel, select Store and press the cursor  
right. Repeat steps é to ! to store another TV channel.  
0 To exit from the menu press the MENU key on the remote  
control repeatedly.  
15  
 
2444.1 en 09-12-2005 11:50 Pagina 16  
Give name  
It is possible to change the name stored in the memory or to  
assign a name to a TV channel or external for which a name has  
not yet been entered.A name with up to 5 letters or numbers  
can be given to the programme numbers 0 to 99.  
Install  
Language  
Auto Store  
Manual Store  
Sort  
Name π  
Channel Edit  
10  
11  
.........  
Note : It is not possible to rename the VGA source.  
& Select Name in the Install menu and press the cursor right.  
é Select the programme number.  
Press the cursor right.  
Select the following character with the cursor up/down.  
( Select the following position with the cursor right.  
§ Select the following character.  
è Press the cursor left repeatedly when finished.  
! Select another programme number and repeat steps é to  
è.  
ç Press the MENU key to return to the TV menu. Press again  
to exit the TV menu.  
Note: space, numbers and other characters are located between  
Z and A.  
This feature allows you to edit or skip channels from the  
channel list which have bad of weak signals or channels which  
you do not watch often.  
Editing of channels  
Note: Once a channel is skipped, you cannot select it with the -P+  
key; you can only access the channel with the digit keys.  
Install  
Language  
Auto Store  
Manual Store  
Sort  
Channel  
Skipped  
& Select Channel edit in the Install menu;  
é Press the cursor right to enter the channel list.  
Select the channel you want to skip with the cursor  
left/right.  
Name  
Press the cursor down to select Skipped On or Off.  
Channel Edit π  
( Press the cursor up/down to select another channel and  
repeat step .  
§ Press the MENU key to return to the Install menu.  
16  
 
2444.1 en 09-12-2005 11:50 Pagina 17  
Features menu  
This menu lets you use the TV set as an alarm.  
Timer  
& Press the MENU key.  
é With the cursor, select Features, then Timer.  
TV Menu  
Sleep (only available on certain versions): to select an  
automatic standby period.  
Picture  
Sound  
Features π  
Install  
Brightness  
Colour  
Contrast  
Sharpness  
Time: enter the current time.  
( StartTime: enter the start time.  
§ StopTime: enter the standby time.  
è Channel: enter the number of the channel for the wake-up  
Features  
alarm.  
Timer π (Sleep)  
Child Lock Time  
Contrast+ Start Time  
NR Stop Time  
PIP Channel  
! Activate: the settings include:  
Once for a single alarm;  
Daily for each day,  
Off to cancel.  
ç Display: press the cursor right to select On or Off,  
according to if you want to display the current time on the  
TV screen or not.  
Activate  
Display  
0 Press the B key on the remote control to put the TV set  
in standby. It will automatically come on at the time  
programmed. If you leave the TV set on, it will just change  
programmes at the time entered (and will go to standby  
mode at the Stop Time).  
Note: By combining the Child lock and Timer functions, you can  
restrict the period during which the TV set is used, for example by  
your children.  
PIP (Picture in Picture)  
The Picture In Picture feature allows you to call up a  
subscreen within your main screen enabling you to watch a  
TV channel, a picture from a device connected to the VGA,  
AV or SIDE connectors and a picture from a device  
connected to HDMI/PC-D (e.g. Digital High Definition  
device), at the same time.  
PIP Combinations  
MAIN  
TV/AV/VGA/SIDE HD DVI / HDMI  
TV/AV/VGA/SIDE PC-D  
HD DVI / HDMI TV/AV/VGA/SIDE  
PC-D TV/AV/VGA/SIDE  
PIP  
& Press the MENU key.  
é With the cursor, select Features, then PIP.  
Press the cursor right to select the available PIP sizes: Off,  
Small, Medium, Large or Side-by-side.  
When having selected a size, and a device is connected to  
HDMI/PC-D and switched on, the PIP window automatically  
appears. Press the P- or P+ key or the digit keys to select  
the TV/AV/VGA or SIDE pictures or to display the  
HDMI/PC-D device window in the main screen.  
Select Horizontal or Vertical to move the PIP window to  
another corner of the main screen.  
Note : you can also access the PIP window directly via the æ key  
on the remote control.  
- Press the æ key to display the PIP window;  
- Press the æ key repeatedly to toggle through the various PIP  
window sizes and select your desired size;  
- Use the cursor left/right to move your PIP window horizontally or  
vertically;  
- Use the P-/+ key to change the programme on the PIP screen.  
17  
 
2444.1 en 09-12-2005 11:50 Pagina 18  
Child lock  
The Child lock feature receives and processes data sent by  
broadcasters or other programme providers that contain  
programme content advisories.When programmed by the  
viewer, the TV can respond to the content advisories and block  
program content that may be found objectionable.  
Child lock allows parents to block out or “censor” any channels  
they think children should not watch.A channel blocked cannot  
be viewed until a correct access code is used to unlock the  
channel for viewing.  
TV Menu  
Picture  
Sound  
Features π  
Install  
Timer  
Child Lock  
Contrast+  
NR  
& Press the MENU key.  
Features  
é With the cursor, select Features, then Child lock.  
Press the cursor right to enter the Child lock menu.  
Timer Lock Channel  
Child Lock π Change Code  
Contrast+ Clear All  
NR Lock All  
You are asked to enter your Access Code.  
• Press 0, 7, 1, 1 on the remote control.  
Incorrect will appear on the screen.  
PIP  
• Press 0, 7, 1, 1 on the remote control again. New Code  
will appear on the screen.  
• Enter a new 4-digit code using the number keys. Confirm  
Code will appear on the screen.  
• Enter your new 4-digit code again. Confirmed will flash on  
the screen briefly and the highlight bar goes back to Block  
Channel.  
Important: you have forgotten  
your Access code  
Remember that 0,7,1,1 is the  
default Child lock code. If your  
access code has been changed by  
someone other than you (a child,  
for example) or you have  
forgotten the code, you can  
always get in by inputting the  
default code.  
Child lock features  
Lock Channel  
Select the TV channel you want to block. Press the cursor  
right to lock the channel.  
Repeat for any channels you want to lock from viewing.  
Change Code  
To change your lock Access Code. Enter your current  
access code or the overriding code 0,7,1,1 and enter a new  
personal access code.The previous code is erased and the  
new code is stored.  
Clear All  
To unlock all locked programmes.  
Lock All  
To lock all channels and programming at once. In the OFF  
mode, you go back to the individual locked channels.  
18  
 
2444.1 en 09-12-2005 11:50 Pagina 19  
Only English teletext supported  
Teletext  
Teletext is an information system broadcast by certain channels which can be consulted like a  
newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar  
with the transmission language (cable networks, satellite channels, etc.).  
Press:  
You will obtain:  
b
Teletext  
on/off  
This is used to call teletext, and then exit.  
The summary appears with a list of items that can be  
accessed. Each item has a corresponding 3 digit page  
number.  
If the channel selected does not broadcast teletext, the indication  
100 will be displayed and the screen will remain blank (in this  
case, exit teletext and select another channel).  
0/9  
-P+  
Selecting  
a page  
Enter the number of the page required using the 0 to 9  
or -P+ keys. Example: page 120, enter 1 2 0.  
The number is displayed top left, the counter turns and  
then the page is displayed. Repeat this operation to view  
another page.  
If the counter continues to search, this means that the page is not  
transmitted. Select another number.  
OOOO  
Direct  
access to  
the items  
Coloured areas are displayed at the bottom of the screen.  
The 4 coloured keys are used to access the items or  
corresponding pages.  
The coloured areas flash when the item or the page is not yet  
available.  
i
Contents  
This returns you to the contents page (usually page 100).  
cursor  
oœ  
Enlarge  
a page  
This allows you to display the top or bottom part of the  
page and then return to normal size.  
g
Stop subpage  
acquisition  
Certain pages contain subpages which are automatically  
displayed successively.This key is used to stop or resume  
subpage acquisition.The indication _ appears top left.  
:
Double page  
teletext  
To activate or deactivate the double page teletext display  
mode.The active page is displayed on the left and the  
following page is displayed on the right. Press g if you  
want to hold a page (i.e. the contents page).The active page  
is then displayed on the right.To return to normal mode,  
press X.  
X
19  
 
2444.1 en 09-12-2005 11:50 Pagina 20  
Using in PC monitor mode  
Your TV can be used as a computer monitor.  
You must first of all connect the computer, adjust the resolution and refresh rate (see p. 10).  
Notes:  
- When using the TV as a PC monitor, slight diagonal interference lines may be observed when it is operated under  
electromagnetic interference environment but will not affect the performance of this product.  
- For better performance, a good quality HDMI/DVI/VGA cable with good noise isolation filter is recommended.  
Choosing PC-VGA mode  
& Press the AV key on the remote control to display the Source list.  
é Use the keys to select PC-VGA and then press π to switch the TV to PC-VGA mode.  
To return to TV mode, repeat steps & and é, but select TV instead.  
Choosing PC-D mode  
& Press the AV key on the remote control to display the Source list.  
é Use the keys to select PC-D and then press π to switch the TV to PC-D mode.  
To return to TV mode, repeat steps & and é, but select TV instead.  
Using the PC menus  
Press the MENU key to access the specific settings of the PC  
monitor mode. Use the cursor keys to adjust them (the settings are  
automatically saved).  
PC menu  
Picture  
Picture π Brightness  
Audio Selection Contrast  
Features Horizontal  
Reset to Factory Vertical  
Colour Temp  
Brightness/Contrast: to adjust the brightness and contrast.  
Horizontal/Vertical*: to adjust the horizontal and vertical  
placing of the image.  
ColourTemp: to adjust the colours (cool, normal or warm).  
Audio selection  
Features  
To choose the sound reproduced on the TV (PC/HD or TV).  
Note:  
-You must choose TV mode before going to PC/HD mode.  
- To listen to the sound from a HD device in PC mode, take  
care you also connected the audio cables to the HD device.  
Phase  
Clock  
Format  
PIP  
Auto Adjust  
Features  
Phase/Clock*: eliminates the horizontal (Phase) and vertical  
(Clock) interfering lines.  
Format: to choose between large screen (Fullscreen) or the  
original (Native) format of the PC screens.  
PIP: change the Size and Position of the PIP window on the  
screen when the æ key is used.  
Auto adjust*: position is set automatically.  
Reset to Factory  
To return to the factory settings.  
* These adjustments are not available in PC-D mode.  
20  
 
2444.1 en 09-12-2005 11:50 Pagina 21  
Using in HD (High Definition) mode  
The HD (High Definition) mode allows you to enjoy clearer and sharper pictures through the CVI-1,  
CVI-2 or HDMI input if you are using a HD receiver/equipment that can transmit high definition  
programming.  
You must first of all connect your HD equipment (see p. 7).  
Choosing HD mode  
& Press the AV key on the remote control to display the Source list.  
é Depending on your connections, use the keys to select CVI-1 (SD/HD), CVI-2 (SD/HD) or  
HDMI and then press π to switch the TV to the selected HD mode.  
To return to TV mode, repeat steps & and é, but select TV instead.  
Using the HD menus  
Press the MENU key to access the specific settings of the HD menu. Use the cursor keys to adjust them  
(the settings are automatically saved).  
Picture/Sound menu  
The HD picture/sound settings are the same as the TV picture/sound settings and function exactly the  
same way as in the TV menu.  
Features  
PIP: to adjust the size and position of the PIP screen.  
Horizontal shift : to adjust the horizontal placing of the image.  
Vertical shift : to adjust the vertical placing of the image.  
Kensington Security Slot (if present)  
Your TV is equipped with a Kensington Security Slot, to prevent it from getting stolen.An anti-  
theft Kensington lock has to be purchased separately.  
The Kensington lock is a plastic-coated steel cable with a lock. One end has to be fixed to the  
opening of the TV and locked with a special key.The other end is attached to a fixed point.  
® Kensington and MicroSaver are registred US trademarks of ACCO World Corporation with issued  
registrations and pending applications in other countries throughout the world.All other registered and  
unregistered trademarks are the property of their respective owners.  
21  
 
2444.1 en 09-12-2005 11:50 Pagina 22  
Tips  
Poor Picture  
• Have you selected the correct TV system in the manual installation menu?  
• Is your TV or house aerial located too close to loudspeakers, non-earthed audio  
equipment or neon lights, etc.?  
• Mountains or high buildings can cause double pictures or ghost images.  
Sometimes you can improve the picture quality by changing the direction of the  
aerial.  
• Is the picture or teletext unrecognisable? Check if you have entered the correct  
frequency. See Store TV channels, Manual store,p. 9.  
• Check the HDMI connection.  
No Picture  
• Are the supplied cables connected properly ? (The aerial cable to the TV, the  
other aerial to your recorder, theVGA cables to the display, the power cables.)  
• Has the child lock been switched off ?  
• Is your PC switched on ?  
• Do you see a black screen and the indicator in front of the TV lights up green,  
this means that the display mode is not supported.  
Switch yourVGA- or HDMI-source to a correct mode.  
• In case of weak or bad signal, consult your dealer.  
No picture and  
power switched on  
Your TV has a protective mode in case there is too much heat build-up.  
Check the clearance around the vents of the device to be certain there are no  
blocking walls or cabinets which would limit the air flow.  
Digital distortion  
No sound  
The low quality of some digital picture material may be the cause of digital image  
distortion. In this case select the Soft setting using the Smart picture key a on  
the remote control.  
• No sound on any channel? Check the volume isn’t at minimum.  
• Is the sound interrupted with the mute key ¬?  
• When no TV signal is detected, the TV automatically switches off the sound.  
This is proper operation and does not indicate a malfunction.  
No solution found Switch your TV off and then on again once. Never attempt to repair a defective  
for your picture or TV yourself. Check with your dealer or call a TV technician.  
sound problem ?  
Menu  
Have you selected the wrong menu? Press the MENU key again to exit from the  
menu.  
Remote control  
• Check if the remote control is in the correct mode.  
• If your TV no longer responds to the remote control, the batteries may be dead.  
You can still use the MENU key and the -/+ keys on the right side of your TV.  
Standby  
Your TV consumes energy in the standby mode. Energy consumption contributes  
to air and water pollution. Power consumption: 2 W.  
Control of  
accessory devices  
• The infrared signals of the screen may influence the reception sensibility of  
other peripherals.  
Solution: replace the batteries of the remote control of other devices.  
E.g. keep away a wireless headphone from within a radius of 1 m.  
Miscellaneous  
. Ambient temperature: + 5~ + 40°C  
. Mains: 50/60 Hz AutoVoltage ranging from 198V to 264V  
. Power consumption: around 160 W  
. Standby consumption: < 2 W  
. Weight (excl. packaging): 42 kg  
. Dimensions (wxhxd): 1240x680x104  
22  
 
2444.1 en 09-12-2005 11:50 Pagina 23  
23  
 
2444.1 en 09-12-2005 11:50 Pagina 24  
24  
 
cover 2444.1 09-12-2005 11:25 Pagina 3  
 
cover 2444.1 09-12-2005 11:25 Pagina 4  
Specifications are subject to change without notice  
Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners  
2005 © Koninklijke Philips Electronics N.V. All rights reserved  
Printed in Belgium  
 

Philips MP3 Docking Station AJ301D 12 User Manual
Philips Outdoor Cart 14 PT 110A User Manual
Philips Stereo System SWV3442W User Manual
Philips VCR VRZ360 User Manual
Polk Audio Speaker System MM2084 User Manual
Polycom Telephone IP3000 User Manual
Poulan Brush Cutter 530164830 User Manual
Precor Treadmill EFX534 User Manual
ProForm Elliptical Trainer dtl44941 User Manual
Pure Acoustics Speaker QX550 User Manual