Planar Car Video System PJT195RW User Manual

 
Contents  
Preface.........................................................................................2  
Installation ...................................................................................4  
Unpacking.......................................................................................................................................................................................4  
Package Overview........................................................................................................................................................................4  
Viewing Angle Adjustment .......................................................................................................................................................5  
Detaching LCD Monitor from Its Stand.................................................................................................................................5  
Interface for Arm Applications .................................................................................................................................................5  
Connecting the Display..............................................................................................................................................................5  
Connecting the AC Power .........................................................................................................................................................6  
Connecting the Audio Cable ....................................................................................................................................................6  
Connecting the USB Cable ........................................................................................................................................................6  
Setting Up the LCD Monitor......................................................................................................................................................6  
Power Management System.....................................................................................................................................................6  
Display Controls............................................................................7  
User Controls..................................................................................................................................................................................7  
Adjusting the Monitor's Display ..............................................................................................................................................8  
OSD Lock Out Function ........................................................................................................................................................... 11  
Technical Information .................................................................12  
Specifications.............................................................................................................................................................................. 12  
Standard Timing Table............................................................................................................................................................. 14  
Troubleshooting...........................................................................16  
Touch Screen Driver Installation..................................................17  
Product Registration and Technical Support.................................19  
 
1
Preface  
This manual is designed to assist users in setting up and using the LCD Monitor. Information in this document has been carefully  
checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is  
subject to change without notice. This document contains proprietary information protected by copyright. All rights are  
reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior  
written permission of the manufacturer.  
FCC Statement Warning  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC  
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the  
instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of  
the following measures:  
Reposition or relocate the receiving antenna.  
Increase the separation between the equipment and the receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced monitor technician for help.  
Warning  
Use only shielded signal cables to connect I/O devices to this equipment. You are cautioned that changes or  
modifications not expressly approved by the party responsible for comliance could void your authority to  
operate the equipment.  
This device complies with part 15 FCC Rules. Operation is subject to the following two conditions (1) This device  
may not cause harmful interference. (2) This device must accept any interference received, including  
interference that may cause undesired operation.  
Canadian DOC Notice  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
Important Recycle Instruction:  
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED  
OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE  
INFORMATION, CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT  
WWW.EIAE.ORG. FOR LAMP SPECIFIC DISPOSAL INFORMATION CHECK  
WWW.LAMPRECYCLE.ORG.  
Contains Mercury, Dispose of Properly  
For more information on how to recycle your product, please visit WWW.PLANARSYSTEMS.COM/GREEN  
 
2
Important Safety Instructions  
Please read the following instructions carefully. This manual should be retained for future use.  
1. To clean LCD Monitor screen;  
-- Power off LCD Monitor and unplug the AC Cord.  
-- Spray a non-solvent cleaning solution onto a rag.  
-- Gently clean the screen with dampened rag.  
2. Do not place the LCD Monitor near a window. Exposing the monitor to rain water,  
moisture or sunlight can severely damage it.  
3. Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.  
4. Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should be  
performed by an authorized technician.  
5. Store LCD Monitor in a room with a room temperature of -20° ~ 60°C (or -4° ~ 140°F). Storing the LCD  
Monitor outside this range could result in permanent damage.  
6. If any of the following occurs, immediately unplug your monitor and call an authorized technician.  
*
*
*
Monitor to PC signal cable is frayed or damaged.  
Liquid spilled into LCD Monitor or the monitor has been exposed to rain.  
LCD Monitor or the case is damaged.  
7. Only use the supplied main lead to connect the monitor. For a nominal current up to 6A and a device weight  
above 3 kg, a line not lighter than H05VV-F, 3G, 0.75 mm2 must be used.  
 
3
Installation  
Unpacking  
Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a  
stable and clean surface near a wall power outlet. Make sure that LCD Monitor has enough space around it for  
sufficient airflow. Though the LCD Monitor uses very little power, some ventilation is needed to ensure that the  
Monitor does not become too hot.  
After you unpack the LCD Monitor, make sure that the following items were included in the box:  
Package Overview  
LCD Display  
Power Cord  
VGA Signal Cable  
USB Cable (A to B)  
Audio-in Cable  
User’s Manual  
User’s Guide  
Touch Screen Driver  
Installation CD-ROM  
If you find that any of these items is missing or appears damaged, contact your dealer immediately.  
 
4
Viewing Angle Adjustment  
+90°  
The LCD Monitor is designed to allow users to have a comfortable  
viewing angle. The viewing angle can be adjusted  
from -2°to +90°.(See fig. 1-1)  
-2°  
Figure 1-1  
Warning  
Do not force the LCD Monitor over its maximum viewing angle settings as stated above. Attempting this will result in  
damaging the Monitor and Monitor stand.  
Detaching LCD Monitor from Its Stand  
Unscrew screws from the base support column and pull down   
the hinge to release.  
Figure 1-2  
Interface for Arm Applications  
Before installing to mounting device, please refer to Fig.1-2.  
The rear of this LCD display has four integrated 4 mm, 0.7 pitch  
threaded nuts, as well as four 5 mm access holes in the plastic  
covering as illustrated in Figure 1-3. These specifications meet the  
VESA Flat Panel Monitor Physical Mounting Interface Standard  
(paragraphs 2.1 and 2.1.3, version 1, dated 13 November 1997).  
Note :Please using M 4mm x 11mm (L) screw for this application.  
Figure 1-3  
Connecting the Display  
1. Power off your computer.  
2. Connect one end of the signal cable to the LCD Monitor’s VGA  
port . (See Fig 1-4)  
3. Connect the other end of the signal cable to the VGA port on  
your PC.  
4. Make sure connections are secure.  
D-SUB  
Figure1-4  
 
5
Connecting the AC Power  
1. Connect the power cord to the LCD Monitor.(See Fig. 1-5)  
2. Connect the power cord to an AC power source.  
Figure1-5  
Connecting the Audio Cable  
1. Connect the audio cable to the "LINE OUT" jack on your PC's  
audio card or to the front panel's “AUDIO OUT” jack of your CD  
ROM drive. (See Fig. 1-6)  
Connect the other end of the audio cable to the LCD Monitor's  
"LINE IN" jack.  
Figure1-6  
Connecting the USB Cable  
1. Connect the USB cable to your PC.  
2. Connect the USB cable to LCD Monitor. (See Fig. 1-7)  
USB cable  
Figure1-7  
Setting Up the LCD Monitor  
1. Make sure the AC power cord is connected to the LCD Monitor.  
2. Turn on the LCD Monitor's power switch, located on the bezel of the monitor.  
Power Management System  
This LCD Monitor complies with the VESA DPM Power Management guidelines. If you have VESA's DPM™  
compliance display card or software installed in your PC, the monitor can automatically reduce its power  
consumption when not in use. If input from keyboard, mouse or other input devices is detected by the  
computer, the monitor will automatically "wake up". When the LCD Monitor is in power saving mode, the  
monitor screen will be blank and the power LED indicator will light yellow.  
 
6
Display Controls  
User Controls  
A brief description and the location of all LCD Monitor functions controls and indicators:  
Figure 2-1  
Power LED will be Green when monitor is on, be yellow when in power saving  
mode, be dark when monitor in off mode.  
1
2
Power ON/OFF switch. Push to power on or power off. (Toggle switch)  
Shows main OSD menu/ Enter key (in OSD menu)/ Audio mute and unmute  
( must activate Volume OSD first, push / then Menu/Enter)  
Menu/Enter  
3
4
5
Shows Volume OSD/ Moves right or up (in OSD menu)  
Selects input source/ Moves left or down (in OSD menu)  
Auto adjustment (in D-Sub input only)/ Exit OSD menu/ Exit (in OSD menu)  
Auto/Exit  
6
 
7
Adjusting the Monitor's Display  
Main OSD  
Sub  
Main Menu icon  
Sub Menu item  
Description  
Menu item  
STANDARD Default Setting. Reflects native display capability.  
Displays scenes in clearest detail. Pictures and  
MOVIE  
GAME  
TEXT  
photographs appear in vibrant colors with sharp  
detail.  
Enhances color.  
Preset Mode  
Optimal balance of brightness and contrast  
prevent eyestrain. The most comfortable way to  
read onscreen text  
PHOTO  
Enhances colors and emphasize fine detail.  
Adjusts the background brightness of the screen  
image.  
Brightness  
Contrast  
Adjusts the contrast between the foreground and  
background of the screen image.  
Adjusts the contrast of screen image  
automatically.  
Auto Contrast  
Black Level  
Sharpness  
Adjusts the black level of screen image.  
Adjusts the scaling effect. (smoother or sharper.)  
 
8
FULL  
Selects wide format for display.  
Selects 4:3 format for display.  
Expansion Mode  
Auto Adjustment  
ASPECT  
Auto adjusts the H/V Position, Phase and Clock of  
picture. (available in analog mode only)  
Adjusts the horizontal position.  
(available in analog mode only)  
H. Position  
V. Position  
Clock  
Adjusts the vertical position.  
(available in analog mode only)  
Adjusts picture Clock.  
(available in analog mode only)  
Adjusts picture Focus.  
Phase  
(available in analog mode only)  
9300K  
7500K  
5000K  
Sets the color temperature to 9300K.  
Sets the color temperature to 7500K.  
Sets the color temperature to 5000K.  
sRGB  
User  
Sets the color temperature to sRGB.  
Allows users to adjust red/green/blue intensity.  
Multi-language selection.  
R/G/B  
Language  
OSD  
H. Position  
Adjusts the horizontal position of the OSD.  
Adjusts the vertical position of the OSD.  
OSD  
V. Position  
OSD  
Turn Off  
Adjusts the OSD timeout.  
Adjusts the volume of audio  
Volume  
Input Select  
D-SUB Selects input signal to analog (D-Sub)  
720/640x400  
Selects the resolution of choice.  
Resolution Select 1360/1280/1024x768  
1680/1400x1050  
DDC/CI  
Recall  
ON/OFF  
Turns ON/OFF DDC/CI support  
Clear each old status and return all adjusted  
parameters to factory preset values.  
 
9
Shows the resolution, H/V frequency and input port  
of current input timing.  
Information  
Icon  
9300  
7500  
5000  
Function  
Description  
Sets the CIE coordinate color temperature to 9300°K  
Sets the CIE coordinate color temperature to 7500°K  
Sets the CIE coordinate color temperature to 5000°K  
CIE coordinated Color Temperature of 9300°K  
CIE coordinated Color Temperature of 7500°K  
CIE coordinated Color Temperature of 6500°K  
Three colors (Red, Green, Blue) can be  
adjusted from the OSD menu  
Sets the settings to a by user defined CIE  
Temperature.  
User  
 
10  
OSD Lock Out Function  
When monitor is in normal display, you can enable the “OSD LOCK OUT” function.  
Option 1: OSD & Power button lock-all 5 buttons including the “POWER” button are locked.  
Press and hold the “Auto/Exit” and “  
”buttons at the same time for 3 seconds  
to lock all 5 buttons  
The monitor will show an “OSD LOCKED !” message for 5 seconds and the message will disappear  
automatically.  
OSD LOCKED !  
Repeat this step to unlock.  
Option 2: OSD Lock – all 4 buttons are locked except the “POWER” button.  
Press and hold the“  
to lock the buttons.  
and  
” buttons at the same time for 3 seconds  
The monitor will show an "OSD UNLOCKED !” message for 5 seconds and the message will disappear  
automatically.  
OSD LOCKED !  
Repeat this step to unlock  
 
11  
Technical Information  
Specifications  
LCD Panel  
Size  
19W"  
Display Type  
Resolution  
Display Dot  
Display Color  
Active matrix color TFT LCD  
1440 x 900  
1440x (RGB) x 900  
16.7M with FRC or Dithering  
Video  
Input Signal  
Input Impedance  
Polarity  
Analog RGB 0.7Vp-p  
75 Ohm 2%  
Positive, Negative  
Amplitude  
0 - 0.7 0.05 Vp  
30~80kHz  
56~75Hz  
Horizontal Frequency: 30 ~ 80 kHz  
Vertical Frequency: 56 ~ 75 Hz  
Multi-mode Supported  
Control  
Power switch (hard and soft types)  
On/Off switch with LED indicator  
Audio  
Input  
500mVrms  
1W +1W  
Output  
OSD  
Brightness  
Contrast  
Digital  
Digital  
Horizontal Position  
Vertical Position  
Phase  
Digital  
Digital  
Digital  
Clock  
Digital  
Display Mode Setup  
Use EEPROM to save settings in memor.  
 
12  
Power Management  
Mode  
Power Consumption*  
42 W maximum  
AC Input  
240 VAC  
LED Color  
Green  
DPM On  
DPM Off  
2 W maximum  
1 W maximum  
240 VAC  
240 VAC  
Yellow  
Dark  
DC switch off  
*Meeting VESA DPM requirements measured from AC Input end of AC power cord.  
Sync Input  
Analog  
TMDS  
--  
Separate TTL compatible horizontal and vertical  
synchronization.  
Signal  
Polarity  
Positive and negative  
Supports VESA DDC2B DDC/CI functions  
Plug & Play  
External Connection  
Power Input (AC input)  
AC socket  
15-pin D-sub connector  
Monitor-to-PC Cable  
Stereo Jack  
Video Cable  
Audio Cable  
Power Input (AC input)  
Environment  
AC socket  
Temperature  
5°C to 40°C/41°F to 104°F  
20% to 80%  
Operating Condition  
Storage Condition  
Relative Humidity  
Temperature  
-20°C to 60° C/-4°F to140°  
5% to 85%  
Relative Humidity  
Power Supply (AC Input)  
Input Voltage  
Single phase, 100 ~ 240VAC, 50 / 60 Hz  
1.2 A maximum  
Input Current  
Size and Weight  
Dimensions  
17.3” (W) x 13.7” (H) x 7.8” (D) (438.5 (W) x 356.6(H) x 227.23 (D) mm)  
13.2 + .6 lbs (6.0 0.3 kg)  
Net Weight  
Gross Weight  
16.8 + .6 lbs (7.6 0.3 kg)  
438.50 mm  
227.23 mm  
 
13  
Standard Timing Table  
If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing.  
SYNC  
FRONT  
BACK  
FH (KHz)  
FV (Hz)  
SYNC  
POLARITY  
TOTAL/ ACTIVE  
(DOT / LINE)  
PIXEL  
FOREQ.(MHz)  
TIMING NAME  
640x350  
WIDTH PORCH PORCH  
(DOT / LINE)  
31.469  
70.087  
31.469  
70.087  
31.469  
59.94  
35  
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
800  
449  
800  
449  
800  
525  
864  
525  
832  
520  
840  
500  
900  
449  
900  
449  
1152  
667  
1024  
625  
1056  
628  
1040  
666  
1056  
625  
1088  
517  
1344  
806  
1328  
816  
1328  
806  
640  
350  
640  
400  
640  
480  
640  
480  
640  
480  
640  
480  
720  
400  
720  
400  
832  
624  
800  
600  
800  
600  
800  
600  
800  
600  
848  
480  
1024  
768  
1024  
768  
1024  
768  
96  
2
16  
37  
16  
12  
16  
10  
64  
3
48  
60  
25.175  
25.175  
25.175  
30.24  
31.5  
VGA-350  
640x400  
96  
2
48  
VGA-GRAPH  
640x480  
35  
96  
2
48  
VGA-480  
33  
640x480  
64  
3
96  
APPLE MAC-480  
640x480  
66.67  
37.861  
72.809  
37.5  
39  
40  
3
16  
1
120  
20  
VESA-480-72Hz  
640x480  
64  
3
16  
1
120  
16  
31.5  
VESA-480-75Hz  
720x350  
75  
31.47  
70.087  
31.469  
70.087  
49.725  
74.55  
35.156  
56.25  
37.879  
60.317  
48.077  
72.188  
46.875  
75  
108  
2
18  
37  
18  
12  
32  
1
54  
28.322  
28.322  
57.2832  
36  
70Hz  
60  
720x400  
108  
2
54  
VGA-400-TEXT  
832x624  
35  
64  
3
224  
39  
APPLE MAC-800  
800x600  
72  
2
24  
1
128  
22  
SVGA  
800x600  
128  
4
40  
1
88  
40  
VESA-600-60Hz  
800x600  
23  
120  
6
56  
37  
16  
1
64  
50  
VESA-600-72Hz  
800x600  
23  
80  
3
160  
21  
49.5  
VESA-600-75Hz  
848x480  
31.02  
60  
112  
8
16  
6
112  
23  
33.75  
65  
VESA  
1024x768  
XGA  
48.363  
60.004  
53.964  
66.132  
56.476  
70.069  
136  
6
24  
3
160  
29  
1024x768  
COMPAQ-XGA  
1024x768  
VESA-768-70Hz  
176  
4
16  
8
112  
36  
71.664  
75  
136  
6
24  
3
144  
29  
 
14  
SYNC  
FRONT  
BACK  
FH (KHz)  
FV (Hz)  
SYNC  
POLARITY  
TOTAL/ ACTIVE  
(DOT / LINE)  
PIXEL  
FOREQ.(MHz)  
WIDTH PORCH PORCH  
TIMING NAME  
(DOT / LINE)  
1024x768  
VESA-768-75Hz  
1024x768  
1152x864  
(60Hz)  
60.023  
75.029  
60.24  
54.054  
59.27  
63.851  
70.012  
67.5  
+
+
1312  
800  
1024  
768  
96  
3
16  
1
176  
28  
78.75  
80  
1328  
1480  
912  
1024  
1152  
864  
96  
96  
3
32  
40  
13  
32  
1
176  
192  
32  
+
+
+
+
+
+
80  
1152x864  
(70Hz)  
1480  
912  
1152  
864  
96  
3
200  
44  
94.499  
108  
1152x864  
(75Hz)  
1600  
900  
1152  
864  
128  
2
64  
2
256  
32  
75  
1152x870  
(75Hz)  
68.68  
75.06  
44.772  
59.855  
60  
1456  
915  
1152  
870  
128  
3
32  
3
144  
39  
100  
1280x720  
(60Hz)  
1664  
748  
1280  
720  
128  
5
64  
3
192  
20  
74.5  
108  
+
+
+
+
+
+
+
+
+
+
+
+
+
+
1280x960  
(60Hz)  
1800  
1000  
1800  
1000  
1800  
1000  
1688  
1066  
1688  
1066  
1792  
795  
1280  
960  
112  
3
96  
1
312  
36  
60  
1280x960  
(70Hz)  
70  
1280  
960  
112  
3
96  
1
312  
36  
126  
70  
1280x960  
(75Hz)  
75  
1280  
960  
112  
3
96  
1
312  
36  
135  
75  
1280x1024  
VESA-1024-60Hz  
1280x1024  
VESA-1024-75Hz  
1360x768  
60Hz  
64  
1280  
1024  
1280  
1024  
1360  
768  
112  
3
48  
1
248  
38  
108  
60  
80  
144  
3
16  
1
248  
38  
135  
75  
75  
112  
6
64  
3
256  
18  
85.5  
88.75  
106.5  
136.75  
75  
1440x900  
Red. BLKing 60Hz  
1440x900  
60Hz  
55.469  
59.901  
55.935  
59.887  
70.635  
74.984  
1600  
926  
1440  
900  
32  
6
48  
3
80  
17  
1904  
934  
1440  
900  
152  
6
80  
3
232  
25  
+
1440x900  
75Hz  
1936  
942  
1440  
900  
152  
6
96  
3
248  
33  
+
Note :  
Mode 640x350, 640x400 and 720x400 will locate on middle position but cannot be expanded to full screen on  
vertical direction.  
 
15  
Troubleshooting  
This LCD Monitor has been pre-adjusted using factory standard VGA timings. Due to the output timing differences among  
various VGA cards in the market, users may initially experience an unstable or unclear display whenever a new display  
mode or new VGA card is selected.  
Attention  
This LCD Monitor Supports Multiple VGA Modes.  
Refer to the Standard Timing Table for a listing of modes supported by this LCD Monitor.  
PROBLEM Picture is unclear and unstable  
The picture is unclear and unstable, please perform the following steps:  
1. Enter PC to “Shut Down Windows” status while you’re in MS-Windows environment.  
2. Check the screen to see if there’s any black vertical stripes appear. If there are, take advantage of the “Clock”  
function in OSD menu and adjust (by increment or decrement numbers) until those bars disappear.  
3. Move to “Phase” function in OSD menu again and adjust the monitor screen to its most clear display.  
4. Click “No” on “Shut Down Windows” and back to the normal PC operating environment.  
PROBLEM There is no picture on LCD Monitor  
If there’s no picture on the LCD Monitor, please perform the following steps:  
1. Make sure the power indicator on the LCD Monitor is ON, all connections are secured, and the system is  
running on the correct timing. Refer to Chapter 3 for information on timing.  
2. Turn off the LCD Monitor and then turn it back on again. If there is still no picture, press the Adjustment  
Control button several times.  
3. If step 2 doesn’t work, connect your PC system to another external CRT. If your PC system Functions properly  
with a CRT Monitor but it does not function with the LCD Monitor, the output timing of the VGA card may be  
out of the LCD’s synchronous range. Please change to an alternative mode listed in the Standard Timing  
Table or replace the VGA card, and then repeat steps 1 and 2.  
PROBLEM There is no picture on LCD Monitor  
If you have chosen an output timing that is outside of the LCD Monitor’s synchronous range (Horizontal: 30 ~  
80 kHz and Vertical: 56 ~ 75 Hz), the OSD will display a “Out of Range” message. Choose a mode that is  
supported by your LCD Monitor.  
Also, if the signal cable is not connected to LCD monitor at all or properly, the monitor screen will display a  
message “No Input Signal”.  
 
16  
Touch Screen Driver Installation  
The PJT155R/ PJT175R/ PJT195RW is available with USB connection. The touch software is located on the  
enclosed CD-ROM for these operating systems: Windows® 7, VISTA, XP, 2000, ME, 98, NT4.0, CE, XP Embedded,  
Linux, Apple® Mac OS  
Please Note: The PJT155R/ PJT175R/ PJT195RW is Microsoft® Windows® HID (Human Interface Device)  
compatible if you use the USB touch screen interface. No additional software driver is required for general  
operation of the touch screen. A calibration tool can be installed for improved touch position accuracy. The  
calibration tool supports Windows® 7, VISTA, XP, XP Embedded, and 2000 operating systems via USB only.  
PJT155R/ PJT175R/ PJT195RW Driver Installation  
Touch Screen Driver Installation  
The PJT155R/ PJT175R/ PJT195RW is available with USB connection. The touch driver is available online for  
these operating systems: Windows® 7, VISTA 64/32 bits, XP, 2000, ME, 98, NT4.0, CE, XP Embedded, Linux,  
Apple® Mac OS.  
Please Note: The PJT155R/ PJT175R/ PJT195RW is Microsoft® Windows® HID (Human Interface Device)  
compatible if you use the USB touch screen interface. No additional software driver is required for general  
operation of the touch screen. A calibration tool can be installed for improved touch position accuracy. See  
“Optional Calibration Tool Install” section for more information.  
PJT155R/ PJT175R/ PJT195RW Optional Calibration Tool Install  
If you would like to use the Optional Calibration Tool, follow the instructions below. Please note: the  
calibration tool supports Windows® 7, VISTA, XP, XP Embedded, 2000, 98 and ME operating systems via USB  
only.  
1. Download the calibration tool online.  
2. Execute the calibration tool.  
3. From here the user can choose to do the following:  
a. 4 Points Calibration  
b. 9 Points Linearization  
c. 25 Points Linearization  
d. Clear  
e. Draw Test  
f. Advanced. In the Advanced settings area the user may do the following:  
i. Adjust the Double Click Area.  
ii. Enable auto right click and adjust the auto right click time.  
iii. Choose to be either in the HID Mouse Mode or HID Digitizer Mode  
(Windows® 7, Vista).  
iv. Simply click the “Apply” button once the settings are finalized.  
Download from Www.Somanuals.co1m7. All Manuals Search And Download.  
PJT155R/ PJT175R/ PJT195RW Install Instructions  
If you are using a PC running Windows® 7, VISTA, XP, 2000, ME, 98,  
NT4.0, follow the instructions below:  
1. Power on the PC.  
2. Be sure the USB cable is connected from the PC to the LCD display.  
3. Download the driver online and execute.  
4. Follow the step-by-step instructions as shown on the pop-up windows.  
If you are using a PC running Windows® XP Embedded, follow the  
instructions below:  
Express:  
1. Power on the computer.  
2. Make sure the USB cable is connected to the computer.  
3. Be sure that your EWF is disabled. If your EWF is enabled, please disable the EWF by  
using the EWF Manager command.  
4. Once the EWF is disabled, download the driver online and execute.  
5. Click on the XP driver and follow the step-by-step instructions as shown on the pop-up  
windows.  
Custom:  
1. Power on the computer.  
2. Make sure the USB cable is connected to the computer.  
3. Download the driver online and execute.  
4. Follow the step-by-step instructions found in the folder file of the driver.  
If you are using a PC running Windows® CE, follow the instructions  
below:  
1. Power on the computer.  
2. Make sure the USB cable is connected to the computer.  
3. Download the driver online  
4. Using Platform Builder, build an image file by following the step-by-step instructions  
found in the folder file of the driver.  
If you are using a PC running Linux or Apple® Mac OS, follow the  
instructions below:  
1. Power on the computer.  
2. Make sure the USB cable is connected to the computer.  
3. Download the driver online and execute.  
4. Follow the step-by-step instructions found in the folder file of the driver.  
Download from Www.Somanuals.co1m8. All Manuals Search And Download.  
Product Registration and Technical Support  
Register Your Planar Products Today  
Thank you choosing Planar. To assure you receive all the benefits of your Planar product  
and services, register your Planar product today.  
Visit our website to register your product at  
Cables, Replacement Lamps, Accessories  
To find cables, replacement lamps and accessories for your Planar projector, LCD monitor,  
Technical Support  
touch screen drivers, warranty information and access to Planar's Technical Library for online  
troubleshooting.  
To speak with Planar Customer Support please have you model and serial number available  
and dial:  
Planar Support  
Tel: 1-866-PLANAR1 (866-752-6271) or +1 503-748-5799 outside the US.  
Hours: 24 hours a day, 7 days a week.  
Toll or long distance charges may apply.  
 
19  
Planar Systems,Inc.  
Customer Service  
1195 NW Compton Drive  
Beaverton, OR 97006-1992  
Tel: 1-866-PLANAR1 (866-752-6271), or +1 503-748-5799 outside the United States,  
Hours: 24 hours a day, 7 days a week  
2012 Planar Systems, Inc.  
Planar is a registered trademark of Planar Systems, Inc. Other brands and names are  
the property of their respective owners. Technical information in this document is  
subject to change without notice.  
020-1132-00B  
HDPNRT8910I  
 

Perreaux Stereo Amplifier R200i User Manual
Phase Technology Speaker HP590i User Manual
Philips Bottle Warmer SCF121 11 User Manual
Philips Digital Photo Frame SPF3470T G7 User Manual
Philips Styling Iron HP4667 00 User Manual
Philips Toaster L1700 User Manual
Phoenix Gold Speaker System VSS2 User Manual
Polaroid Digital Camera PDC 301 User Manual
Polaroid Portable DVD Player 20060915 User Manual
ProForm Home Gym PFEX30960 User Manual